Blucher Engineering Proceedings
- Todas as edições
- Última edição
- Equipe de Produção
- ISSN 2357-7592
Análise de um modelo de predição de detonação para simuladores de tipo single-zone de Motores de Combustão Interna
Quantitative Analysis of a Knocking Prediction Model for Internal Combustion Engine Using Single-Zone Methodology
Tonon, Daniel Silva; Bringhenti, Cleverson; Garcia, Ezio Castejon; Tomita, Jesuíno Takachi
Artigo completo:
O uso de biocombustíveis como alternativas aos combustíveis fósseis vem ganhando força, uma vez que essas são fontes de energia renováveis. No Brasil, em especial, o uso do etanol já é altamente difundido, porém, o máximo potencial deste combustível não e
The use of biofuels as alternatives to fossil fuels has been explored, since these are renewable energy sources. In Brazil, in particular, the use of ethanol is already widespread, but the maximum potential of this fuel is not extracted, since the interna
Palavras-chave:
DOI: 10.5151/simea2021-PAP66
Referências bibliográficas
- [1] TONON, D. S., Simulação Computacional de um Motor de Combustão Interna do Tipo Alternativo Utilizando Etanol. 2018. 156f. Dissertação de Mestrado – Instituto Tecnológico de Aeronáutica, São José dos Campos, 2018.
- [2] SANTOS, A. C., A Influência do uso do Etanol Combustível nas Emissões dos Gases do Efeito Estufa nos Motores de Ciclo Otto. 2008. 95f. Dissertação de Mestrado – Instituto Mauá de Tecnologia, São Caetano do Sul, 2008.
- [3] RIBEIRO, R., Cinco incentivos da Europa para carros elétricos que o Brasil pode adotar, UOL. 2018. Disponível em: < https://www.uol.com.br/carros/noticias/redacao/2018/12/16/cinco-incentivos-da-europa-para-carros-eletricos-que-o-brasil-pode-adotar.htm >. Acesso em: 12 Abr. 2020.
- [4] KINTNER-MEYER, M.; SCHNEIDER, K.; PRATT, R.,Impact assessmet of plug-in hybrids on electric utilities and power grids, Pacific Northwest National Laboratory. 2007. Disponível em: <https://www.ferc.gov/about/com-mem/5-24-07-technical-analy-wellinghoff.pdf >. Acesso em: 12
- [5] Abr. 2020.
- [6] HENRYNKOVA, H., Impact analysis of Diffusion of Electric Vehicles in Denmark. 2009. Dissertação de Mestrado – Lund University, Lund, 2009.
- [7] WILKINS, J., Will electric vehicles really reduce pollution?, Ohio State University. Disponível em: <https://www.asc.ohio-state.edu/wilkins.5/writing/Samples/policy/voytishlong.html>. Acesso em: 12 Abr. 2020.
- [8] SCHWANEN, T., The five major challenges facing electric vehicles, BBC. 2019. Disponível em: <https://www.bbc.com/news/uk-49578790>. Acesso em: 12 Abr.2020.
- [9] MONTOIA, V., O FIAT 147, primeiro carro a álcool brasileiro, era fabricado há 40 anos, Auto Esporte. 2019. Disponível em: <https://revistaautoesporte.globo.com/
- [10] Noticias/noticia/2019/07/o-fiat-147-primeiro-carro-alcoolbrasileiro-era-fabricado-ha-40-anos.html>. Acesso em: 13 Abr. 2020.
- [11] MEDINA, A.; CURTO-RISSO, P. L.; HERNÁNDEZ, A. C.; GUZMÁN-VARGAS, L.; ANGULO-BROWN, F.;
- [12] SEN, A. K. Quasi-dimensional simulation of spark ignition engines. 1 ed. London: Springer, 2014.
- [13] MOSES, E.; YARIN, A. L.; BAR-YOSEPH, P., On knocking prediction in spark ignition engines. Combustion and Flame, Vol. 101, pp. 239-261, 1995.
- [14] CAI, L.; PITSCH, H., Optimized chemical mechanism for combustion of gasoline surrogate fuels. Combustion and Flame, Vol. 162, pp. 1623-1637, 2015.
- [15] AMATO, F.; MATOSO, F., Mistura de etanol na gaolina sobe para 27% a partir de 16 de março, G1. 2019.
- [16] Disponível em: <http://g1.globo.com/economia/noticia/2015/03/mistura-de-etanol-na-gasolina-sobe-para-27-partirde-16-de-marco.html>. Acesso em: 18 Abr. 2020.
- [17] HEYWOOD, J. B., Internal Combustion Engine Fundamentals. New York: McGraq-Hill Book Company,1988.
- [18] MAURO, S.; SENER, R.; GÜL, M. Z.; LANZAFAME, R.; MESSINA, M.; BRUSCA, S., Internal combustion engine heat release calculation using single-zone and CFD 3D numerical models. International Journal of Energy and Environmental Engineering, Vol. 9, pp. 215-226, 2018.
- [19] FENG, H.; ZHANG, C.; WANG, M.; LIU, D.; YANG, X., Availability analysis of n-heptane/iso-octane blends during low-temperature engine combustion using a singlezone combustion model. Energy Conversion and Management, Vol. 84, No. 10, pp. 613-622, 2014.
- [20] FERGUSON, C. R., KIRKPATRICK, A. T., Internal Combustion Engines Apllied Thermosciences. New York:John Wiley & Sons, 3 ed., 2015.
- [21] NESHAT, E.; HONNERY, D.; SARAY, R. K., Multizone model for diesel engine simulation based on chemical kinetics mechanism. Applied Thermal Engineering, Vol.121, pp. 351-360.
- [22] HVEZDA, J. Multi-Zone Models of Combustion and Heat Transfer Processes in SI Engines. Journal of Middle European Construction and Design of Cars, pp. 14-22, 2012.
- [23] MARTÍNEZ-BOGGIO, S. D.; CURTO-RISSO, P. L.; HERNÁNDEZ, A. C., Simulation of cycle-to-cycle
- [24] variations on spark ignition engines fueled with gasolinehydrogen blends. Hydrogen Energy. Vol. 41, pp. 9087-9099, 2016.
- [25] TONON, D. S.; GARCIA, E. C., Análise Termodinâmica de Motores de Combustão Interna de Tipo
- [26] Alternativo Usando um Modelo Quasi-dimensional. Simpósio Internacional de Engenharia Automotiva, São Paulo, Brasil, pp. 509-522, 2017.
- [27] AMBRÓS, W. M.; LANZANOVA, T. D. M.; FAGUNDEZ, J. L. S.; SARI, R. L.; PINHEIRO, D. K.;
- [28] MARTINS, M. E. S.; SALAU, N. P. G., Experimental analysis and modeling of internal combustion engin operating with wet ethanol. Fuel, Vol. 158, pp. 270-278, 2015.
- [29] FERRARI, G., Motori a Combustione Interna. Turin: Il Capitello, 4 ed., 2008.
- [30] WAYNE, W. S.; CLARK, N. N.; ATKINSON, C. M., Numerical Prediction of Knock in a Bi-Fuel Engine. SAE Technical Paper, No. 982533, 1998.
- [31] DOUAUD, A. M.; EYZAT, P., Four-Octane-Number Method for Predicting the Anti-Knock Behavior of Fuels and Engines, SAE Technical Paper, No. 780080, 1978
- [32] PIPITONE, E.; BECCARI, S., Calibration of a knock prediction model for the combustion of gasoline-natural gas mixtures. Proceedings of the ASME 2009 Internal Combustion Engine Division Fall Technical Conference, Lucerne, Switzerland, pp. 191–197, 2009.
- [33] WORRET, R.; BERNHARDT, S.; SCHWARZ, F.; SPICHER, U., Application of Different Cylinder Pressure Based Knock Detection Methods in Spark Ignition Engines. SAE Technical Paper, No. 2002-01-1668, 2002.
- [34] YATES, A. D. B.; VILJOEN, C. L., An improved empirical model for describing auto-ignition. SAE Technical Paper, 2008-01-1629.
- [35] YATES, A. D. B.; BELL, A.; SWARTS A., Insights relating to the auto-ignition characteristics of alcohol fuels. Fuel, Vol. 89, pp. 83-93, 2010.
- [36] TOUGRI, I.; COLAÇO, M. J.; LEIROZ, A. J. K.; MELO, T. C. C., Knocking prediction in internal combustion engines via thermodynamic modeling: preliminary results and comparison with experimental data. Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 39, No. 1, pp. 321-327, 2016.
- [37] MATTOS, A. P., Estudo do desempenho de um motor turbo-alimentado a etanol empregando EGR para redução de emissões de NOx e controle de detonação. 2018. 249f. Tese de Doutorado – Universidade Estadual de Campinas, Campinas, 2018.
- [38] KULESHOV, A., Diesel-RK: engine simulation tool. 2004. Disponível em: <http://dieselrk.
- [39] bmstu.ru/Eng/index .php?page=Main>. Acesso em: 05 Abr. 2020.
Como citar:
Tonon, Daniel Silva; Bringhenti, Cleverson; Garcia, Ezio Castejon; Tomita, Jesuíno Takachi; "Análise de um modelo de predição de detonação para simuladores de tipo single-zone de Motores de Combustão Interna", p-277-286.
In: Anais do XXVIII SIMPÓSIO INTERNACIONAL DE ENGENHARIA AUTOMOTIVA.
São Paulo: Blucher,
2021.
ISSN 23577592,
DOI 10.5151/simea2021-PAP66
últimos 30 dias
120
downloads
196
visualizações
707
indexações
Sou autor desse trabalho
Você é citado neste trabalho?
Exportar citação - RefWork (RIS)
Copie a citação abaixo ou clique no botão Download para obter um arquivo com os dados
TY - CONF T1 - Análise de um modelo de predição de detonação para simuladores de tipo single-zone de Motores de Combustão Interna JO - Blucher Engineering Proceedings VL - 8 IS - 1 SP - 277 EP - 286 PY - 2021 T2 - XXVIII SIMPÓSIO INTERNACIONAL DE ENGENHARIA AUTOMOTIVA AU - , , , SN - 23577592 DO - http://dx.doi.org/10.5151/simea2021-PAP66 UR - www.proceedings.blucher.com.br/article-details/anlise-de-um-modelo-de-predio-de-detonao-para-simuladores-de-tipo-single-zone-de-motores-de-combusto-interna-36248 KW - ER -
Exportar citação - BibTeX(BIB)
Copie a citação abaixo ou clique no botão Download para obter um arquivo com os dados
@article{Tonon20144,
title="Análise de um modelo de predição de detonação para simuladores de tipo single-zone de Motores de Combustão Interna",
journal="Blucher Engineering Proceedings",
volume="8",
number="1",
pages="277 - 286",
year="2021",
note="",
issn="23577592",
doi="http://dx.doi.org/10.5151/simea2021-PAP66",
url="www.proceedings.blucher.com.br/article-details/anlise-de-um-modelo-de-predio-de-detonao-para-simuladores-de-tipo-single-zone-de-motores-de-combusto-interna-36248",
author="Daniel Silva Tonon", "Cleverson Bringhenti", "Ezio Castejon Garcia", "Jesuíno Takachi Tomita",
keywords="",
}
Exportar citação - Text(TXT)
Copie a citação abaixo ou clique no botão Download para obter um arquivo com os dados
Daniel Silva Tonon, Cleverson Bringhenti, Ezio Castejon Garcia, Jesuíno Takachi Tomita, Análise de um modelo de predição de detonação para simuladores de tipo single-zone de Motores de Combustão Interna, Blucher Engineering Proceedings, Volume 8, 2021, Pages 277-286, ISSN 23577592, http://dx.doi.org/10.5151/simea2021-PAP66 (www.proceedings.blucher.com.br/article-details/anlise-de-um-modelo-de-predio-de-detonao-para-simuladores-de-tipo-single-zone-de-motores-de-combusto-interna-36248) Palavras-chave:: ;