Maio 2014 vol. 1 num. 1 - 10th World Congress on Computational Mechanics

Full Article - Open Access.

Idioma principal

COMPUTER SYSTEM OF CONTROL AND ELIMINATION OF THE SPECIAL PROCESSES INSTABILITY

Żaba, K. ; Nowak, S. ; Sury, A. ; Wojtas, M. ; Świątek, B. ;

Full Article:

The concept and example of inspection of special processes series, realised during production of critical aviation parts by the investment casting method is presented in the paper. The production cycle was described. Problems resulting from the lack of a possibility of application of the effective interoperational inspection and from the instability of process parameters were presented. The concept and structure of the dedicated expert system of collecting and analysing of data allowing the management of unit processes and their improvement were described. The methodology of constructing the science base on the grounds of archive data, necessary for the development of inference mechanisms assisting the decision taking processes was presented.

Full Article:

Download (PDF)

Palavras-chave: Expert computer systems, Special processes, Critical parts for jet engines.,

Palavras-chave:

DOI: 10.5151/meceng-wccm2012-18917

Referências bibliográficas
  • [1] Korbicz J., Obuchowicz A., Ucinski D.; „Sztuczne sieci neuronowe”, Warszawa, 1994.
  • [2] Russell S.J., Norvig P., „Artificial Intelligence A Modern Approach (3rd Edition)”, Prentice-Hall, 2009.
  • [3] Akerkar R., Sajja P., „ Knowledge-Based Systems”, Jones and Bartlett Publishers, 2009.
  • [4] Giarratano J.C., P. Gary, Riley D., „ Expert Systems: Principles and Programming, (4rd Edition)”, Thomson Press, 200
  • [5] Beynon-Davies P., „Inzynieria systemów informacyjnych”, Wydawnictwa Naukowo-Techniczne, 1999.
Como citar:

Żaba, K.; Nowak, S.; Sury, A.; Wojtas, M.; Świątek, B.; "COMPUTER SYSTEM OF CONTROL AND ELIMINATION OF THE SPECIAL PROCESSES INSTABILITY", p. 2598-2615 . In: In Proceedings of the 10th World Congress on Computational Mechanics [= Blucher Mechanical Engineering Proceedings, v. 1, n. 1]. São Paulo: Blucher, 2014.
ISSN 2358-0828, DOI 10.5151/meceng-wccm2012-18917

últimos 30 dias | último ano | desde a publicação


downloads


visualizações


indexações