DEVELOPMENT OF CERAMICS ENAMEL USING BOTTLE GLASS

DEVELOPMENT OF CERAMICS ENAMEL USING BOTTLE GLASS

COSTA, W. A.; OLIVEIRA, M. S.; SILVA, A. P. S.; SILVA FILHO, F. G. S.; BEZERRA, F. W. F.; MARTELLI, M. C.

Pôster:

The Icoaraci district is an important ceramic pole of Pará state(Brazil). The improvement of certain stages ranging from the treatment of the rawmaterial to the ceramic finish is an important point to the production and marketing ofthe pieces. One of these improvements is the production of a coverage that can beapplied to the ceramic surface, characterized by a thin continuous layer of a materialcalled enamel or glaze, which contributes to its aesthetic, mechanical, electrical andsanitary aspects. This study aimed to develop a suitable glaze for use on Icoaraciceramics, in which bottle glass was used as the main component, varying the amountsof compounds and their firing temperatures. The characterization of the raw materialswas performed by X-ray fluorescence, Thermogravimetric and Differential ThermalAnalysis. The best result was firing at 900°C, with 5% borax, during 3 hours.

The Icoaraci district is an important ceramic pole of Pará state(Brazil). The improvement of certain stages ranging from the treatment of the rawmaterial to the ceramic finish is an important point to the production and marketing ofthe pieces. One of these improvements is the production of a coverage that can beapplied to the ceramic surface, characterized by a thin continuous layer of a materialcalled enamel or glaze, which contributes to its aesthetic, mechanical, electrical andsanitary aspects. This study aimed to develop a suitable glaze for use on Icoaraciceramics, in which bottle glass was used as the main component, varying the amountsof compounds and their firing temperatures. The characterization of the raw materialswas performed by X-ray fluorescence, Thermogravimetric and Differential ThermalAnalysis. The best result was firing at 900°C, with 5% borax, during 3 hours.

Palavras-chave:

DOI: 10.5151/cobeq2018-PT.0494

Referências bibliográficas

• [1] CHAVARRIA J. Ceramics class. Glazes. 1st Ed Buenos Aires. Editorial La Isla, 1998. CASAGRANDE MC, SARTOR MN, GOMES V, DELLA VP, HOTZA D, OLIVEIRA AD. Reaproveitamento de resíduos sólidos industriais: processamento e aplicações no setor cerâmico. Cerâmica Industrial, v. 13, n. 1/2, p. 34-42, 2008. LIRA C, ALARCON OE. Seleção de esmaltes cerâmicos utilizando um delineamento experimental segundo Taguchi (Ceramic glaze obtaining and selection applying Taguchi experimental design). Cerâmica, v. 50, p. 308-317, 2004. MCKINLEY K, EVELE H, BALDWIN C. Analysis of Fracture in Porcelain Enamels. In: Manuscript for the 22nd International Enamellers Congress. 2012. PINHEIRO BCA, HOLANDA JNF. Efeito da temperatura de queima em algumas propriedades mecânicas de cerâmica vermelha. Cerâmica, v. 56, n. 339, p. 237-243, 2010. REIS AWC. Desenvolvimento e aplicação de esmalte na cerâmica de Icoaraci. Trabalho de Conclusão de Curso (Graduação em Engenharia Química) – Instituto de Tecnologia. Universidade Federal do Pará. Belém, 2010. REIS AW, MARTELLI MC, NEVES RF. Enamel Development and Application on the Pottery of Icoaraci. Materials Science Forum. v. 727, Trans Tech Publications, p. 681-685, 2012.

Como citar:

COSTA, W. A. ; OLIVEIRA, M. S. ; SILVA, A. P. S.; SILVA FILHO, F. G. S. ; BEZERRA, F. W. F. ; MARTELLI, M. C. ; "DEVELOPMENT OF CERAMICS ENAMEL USING BOTTLE GLASS", p-1871-1874. In: . São Paulo: Blucher, 2018.
ISSN 23591757, DOI 10.5151/cobeq2018-PT.0494