Artigo - Open Access.

Idioma principal | Segundo idioma

Digital scanning and BIM modeling for modern architecture preservation: the Oscar Niemeyer’s Church of Saint Francis of Assisi

-

Kimi Cogima, Camila ; V. V. de Paiva, Pedro ; Dezen-Kempter, Eloisa ; G. De Carvalho, Marco Antonio ;

Artigo:

The Building Information Modelling (BIM) technology enabled improvement in the design, construction and maintenance stages highly. In the field of existing buildings, including historical assets, this technology has not yet had the same impact. This paper presents a methodology to create an intelligent digital model for an outstanding building from modern architecture in Brazil using multiple reality-based technologies. The fusion of the different point cloud raw data generated a high-resolution Dense Surface Model (DSM), the base of an accurate and detailed parametric Model. This study demonstrated the potential of digital surveying, including low-cost sensors, and BIM for built heritage documentation.

Artigo:

-

Palavras-chave: Reality-based surveying; Point cloud; As-is model; Building Information Modelling; Modern Heritage,

Palavras-chave: -,

DOI: 10.5151/sigradi2018-1473

Referências bibliográficas
  • [1] Antón, D., Medjdoub, B., Shrahily, R., & Moyano, J. (2018). Accuracy evaluation of the semi-automatic 3D modeling for historical building information models. International Journal of Architectural Heritage, 12(5), 790-805.. Castagnetti, C., Dubbini, M., Ricci, P. C., Rivola, R., Giannini, M., & Capra, A. (2017). Critical issues and key points from the survey to the creation of the Historical Building Information Model: the case of Santo Stefano Basilica. The International Archives of Photogrammetry, Remote Sensing and Spatial Information Sciences, 42, 467.
  • [2] Clapuyt, F., Vanacker, V., & Van Oost, K. (2016). Reproducibility of UAV-based earth topography reconstructions based on Structure-from-Motion algorithms. Geomorphology, 260, 4-15. Dellepiane, M., Dell’Unto, N., Callieri, M., Lindgren, S., & Scopigno, R. (2013). Archeological excavation monitoring using dense stereo matching techniques. Journal of Cultural Heritage, 14(3), 201-210. Dore, C., & Murphy, M. (2012). Integration of Historic Building Information Modeling (HBIM) and 3D GIS for recording and managing cultural heritage sites. In Virtual Systems and Multimedia (VSMM), 2012 18th International Conference on (pp. 369-376). IEEE. Everaerts, J. (2008). The use of unmanned aerial vehicles (UAVs) for remote sensing and mapping. The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, 37(2008), 1187-119 Faltýnová, M., Matoušková, E., Šedina, J., & Pavelka, K. (2016). BUILDING FACADE DOCUMENTATION USING LASER SCANNING AND PHOTOGRAMMETRY AND DATA IMPLEMENTATION INTO BIM. International Archives of the Photogrammetry, Remote Sensing & Spatial Information Sciences, 41. Hou, S. Q. (2016). A Design and Research on Protection of Architectural Heritage Based on Digital Technology. In MATEC Web of Conferences (Vol. 63, p. 02038). EDP Sciences. Moussa, W., Abdel-Wahab, M., & Fritsch, D. (2012, October). Automatic fusion of digital images and laser scanner data for heritage preservation. In Euro-Mediterranean Conference (pp. 76-85). Springer, Berlin, Heidelberg. Murtiyoso, A., Grussenmeyer, P., & Freville, T. (2017). Close range UAV accurate recording and modeling of St-Pierre-le-Jeune neo-romanesque church in Strasbourg (France). The International Archives of Photogrammetry, Remote Sensing and Spatial Information Sciences, 42, 519. Nex, F., & Remondino, F. (2014). UAV for 3D mapping applications: a review. Applied geomatics, 6(1), 1-15. Nouwakpo, S. K., Weltz, M. A., & McGwire, K. (2016). Assessing the performance of structure‐from‐motion photogrammetry and terrestrial LiDAR for reconstructing soil surface microtopography of naturally vegetated plots. Earth Surface Processes and Landforms, 41(3), 308-32 Quattrini, R., Pierdicca R. & Morbidoni, C. (2017). Knowledge-based data enrichment for HBIM: Exploring high-quality models using the semantic-web. Journal of Cultural Heritage, 28. Rock, G., Ries, J. B., & Udelhoven, T. (2011). Sensitivity analysis of UAV-photogrammetry for creating digital elevation models (DEM). In Proceedings of Conference on Unmanned Aerial Vehicle in Geomatics. Sun, Z., & Cao, Y. K. (2015). Data processing workflows from low-cost digital survey to various applications: three case studies of Chinese historic architecture. The International Archives of Photogrammetry, Remote Sensing and Spatial Information Sciences, 40(5), 409. Tang, P., Huber, D., Akinci, B., Lipman, R., & Lytle, A. (2010). Automatic reconstruction of as-built building information models from laser-scanned point clouds: A review of related techniques. Automation in construction, 19(7), 829-843. Themistocleous, K., Ioannides, M., Agapiou, A., & Hadjimitsis, D. G. (2015). A new approach for documenting architectural cultural heritage: the case study of Asinou Church in Cyprus. In Intl Conf. on Sustainability in Arch. Cult. Hert.. Volk, R., Stengel, J., & Schultmann, F. (2014). Building Information Modeling (BIM) for existing buildings—Literature review and future needs. Automation in construction, 38, 109-127. Xu, Z., Wu, T. H., Shen, Y., & Wu, L. (2016). Three dimentional reconstruction of large cultural heritage objects based on UAV video and TLS data. The International Archives of Photogrammetry, Remote Sensing and Spatial Information Sciences, 41, 985.
Como citar:

Kimi Cogima, Camila; V. V. de Paiva, Pedro; Dezen-Kempter, Eloisa; G. De Carvalho, Marco Antonio; "Digital scanning and BIM modeling for modern architecture preservation: the Oscar Niemeyer’s Church of Saint Francis of Assisi", p. 457-462 . In: . São Paulo: Blucher, 2018.
ISSN 2318-6968, DOI 10.5151/sigradi2018-1473

últimos 30 dias | último ano | desde a publicação


downloads


visualizações


indexações