Outubro 2023 vol. 10 num. 5 - IX Simpósio Internacional de Inovação e Tecnologia
Full article - Open Access.
DIMENSIONING OF A COMPRESSION SPRING APPLIED TO A PRESSURE RELIEF VALVE
DIMENSIONING OF A COMPRESSION SPRING APPLIED TO A PRESSURE RELIEF VALVE
Rocha, Angélica Thaís Oliveira Silva ; Oliveira, Frederico Garcia de ; Brazil, Jhonderson Oliveira ; Oliveira, João Ricardo Lima de ; Beal, Valter Estevão ;
Full article:
Pressure relief valves are safety devices widely used in industry. They are used to balance pressures between two environments and prevent damage to equipment, the environment and/or human lives. With their wide use, they have solution principles and varied projects, which makes it difficult to use calculation rules for dimensioning. In a subsea application, the need to install a pressure relief valve was identified. In this work, we present the design and experimental validation for the spring responsible for the valve operation. There are differences between the calculated and the realized due to various uncertainties or lack of previous data. In this way, the designer needs to keep the project flexible to adapt after carrying out a physical proof of concept.
Full article:
Pressure relief valves are safety devices widely used in industry. They are used to balance pressures between two environments and prevent damage to equipment, the environment and/or human lives. With their wide use, they have solution principles and varied projects, which makes it difficult to use calculation rules for dimensioning. In a subsea application, the need to install a pressure relief valve was identified. In this work, we present the design and experimental validation for the spring responsible for the valve operation. There are differences between the calculated and the realized due to various uncertainties or lack of previous data. In this way, the designer needs to keep the project flexible to adapt after carrying out a physical proof of concept.
Palavras-chave: Compression Spring; Pressure Safety Valve; Subsea Equipment,
Palavras-chave: Compression Spring; Pressure Safety Valve; Subsea Equipment,
DOI: 10.5151/siintec2023-306247
Referências bibliográficas
- [1] ¹ NORTON, Robert L. Projeto de máquinas: Uma abordagem integrada. Porto Alegre: Bookman, 2004. ² BUDYNAS, R. G.; NISBETT, J. K. Elementos de máquinas de Shigley. 10. ed. Porto Alegre: AMGH, 2016. 3 PARKER HANNIFIN; Catalog O-Ring Handbook, Division Europe.
Como citar:
Rocha, Angélica Thaís Oliveira Silva ; Oliveira, Frederico Garcia de ; Brazil, Jhonderson Oliveira ; Oliveira, João Ricardo Lima de ; Beal, Valter Estevão ; "DIMENSIONING OF A COMPRESSION SPRING APPLIED TO A PRESSURE RELIEF VALVE", p. 431-437 . In: .
São Paulo: Blucher,
2023.
ISSN 2357-7592,
DOI 10.5151/siintec2023-306247
últimos 30 dias | último ano | desde a publicação
downloads
visualizações
indexações