Direct Digital Manufacturing of Architectural Models using Binder Jetting and Polyjet Modeling

Direct Digital Manufacturing of Architectural Models using Binder Jetting and Polyjet Modeling

Junk, Stefan; Niederhüfner, Michelle; Borkowska, Nina; Schrock, Steffen

Article:

Today, architectural models are an important tool for illustrating drawn-on plansor computer-generated virtual models and making them understandable. Inaddition to the conventional methods for the manufacturing of physical models, awide range of processes for Direct Digital Manufacturing (DDM) has spreadrapidly in recent years. In order to facilitate the application of these new methodsfor architects, this contribution examines which technical and economic resultsare possible using 3D printed architectural models. Within a case study, it will beshown on the basis of a multi-storey detached house, which kind of datapreparation is necessary. The DDM of architectural models will be demonstratedusing two widespread techniques and the resulting costs will be compared.

Today, architectural models are an important tool for illustrating drawn-on plansor computer-generated virtual models and making them understandable. Inaddition to the conventional methods for the manufacturing of physical models, awide range of processes for Direct Digital Manufacturing (DDM) has spreadrapidly in recent years. In order to facilitate the application of these new methodsfor architects, this contribution examines which technical and economic resultsare possible using 3D printed architectural models. Within a case study, it will beshown on the basis of a multi-storey detached house, which kind of datapreparation is necessary. The DDM of architectural models will be demonstratedusing two widespread techniques and the resulting costs will be compared.

Palavras-chave:

DOI: 10.5151/proceedings-ecaadesigradi2019_073

Referências bibliográficas

• [1]

Como citar:

Junk, Stefan; Niederhüfner, Michelle; Borkowska, Nina; Schrock, Steffen; "Direct Digital Manufacturing of Architectural Models using Binder Jetting and Polyjet Modeling", p-451-456. In: Proceedings of 37 eCAADe and XXIII SIGraDi Joint Conference, “Architecture in the Age of the 4Th Industrial Revolution”, Porto 2019, Sousa, José Pedro; Henriques, Gonçalo Castro; Xavier, João Pedro (eds.). São Paulo: Blucher, 2019.
ISSN 23186968, DOI 10.5151/proceedings-ecaadesigradi2019_073