Dezembro 2024 vol. 11 num. 2 - X Simpósio Internacional de Inovação e Tecnologia

Completo - Open Access.

Idioma principal | Segundo idioma

DISCUSSING THE DIGITAL MANUFACTURE PROCESS OF PROSTHESES FOR UPPER LIMBS

DISCUSSING THE DIGITAL MANUFACTURE PROCESS OF PROSTHESES FOR UPPER LIMBS

Oliveira, Herbert Fernandes de ; Dias, Josualdo ; Saba, Hugo ;

Completo:

"The present work aims to discuss the processes of Digital Fabrication of upper limb prostheses, focusing on models designed for partial hand amputations. The methodological approach was divided into the Exploratory Phase, which provided the conceptual framework for the project, and the Maker Phase, where experiences in fabricating two functional upper limb prosthesis prototypes, Cyborg Beast and K-1 Hand, were shared. The discussions revealed significant potential for these experiences to become real contributions to 3D-printed prosthetics communities, such as E-NABLE. Sharing experiences and solutions reflects this project's immersion in the maker culture present in Digital Fabrication communities and aligns with future work on documenting processes and adapting models to aid in the production of new upper limb prosthesis models."

Completo:

"The present work aims to discuss the processes of Digital Fabrication of upper limb prostheses, focusing on models designed for partial hand amputations. The methodological approach was divided into the Exploratory Phase, which provided the conceptual framework for the project, and the Maker Phase, where experiences in fabricating two functional upper limb prosthesis prototypes, Cyborg Beast and K-1 Hand, were shared. The discussions revealed significant potential for these experiences to become real contributions to 3D-printed prosthetics communities, such as E-NABLE. Sharing experiences and solutions reflects this project's immersion in the maker culture present in Digital Fabrication communities and aligns with future work on documenting processes and adapting models to aid in the production of new upper limb prosthesis models."

Download (PDF)

Palavras-chave: Digital Fabrication, 3D Printing, Prostheses, Assistive Technology,

Palavras-chave: Digital Fabrication, 3D Printing, Prostheses, Assistive Technology,

DOI: 10.5151/siintec2024-390598

Referências bibliográficas
  • [1] "1 TANURE, Paula Guimarães Andrade et al. Dinâmica de ensino baseada em
  • [2] fabricação digital e PBL para apoiar os professores de psicologia na apresentação
  • [3] do Teste de Pirâmide Colorida Pfister. Brazilian Journal of Health Review, v. 4, n.
  • [4] 2, p. 6132-6145, 2021.
  • [5] 2 DO NASCIMENTO, Beatriz Paredes et al. PRODUÇÃO DE PRÓTESE PARA
  • [6] MEMBROS SUPERIORES A PARTIR DE MANUFATURA ADITIVA:: O CASO
  • [7] PRINTING FOR LIFE. International Journal of Management-PDVG, v. 2, n. 2,
  • [8] 2022.
  • [9] 3 BIÃO, Menilde AS et al. EDUCAÇÃO E SAÚDE: RELATO DE EXPERIÊNCIA DO
  • [10] PROJETO DE EXTENSÃO EM PRÓTESE E ÓRTESE–INTEGRANDO ENSINO E
  • [11] PESQUISA. Anais do Seminário Tecnologias Aplicadas a Educação e Saúde,
  • [12] 2019.
  • [13] 4 DE MIRANDA, Carlos Alberto Silva; PAIVA, Anna Izabella Mendes; TAVARES,
  • [14] Paulo Henrique Campos Prado. Produzindo próteses substitutivas acessíveis em
  • [15] impressão 3D a partir de projetos open source.JOURNAL OF LEAN SYSTEMS,
  • [16] Vol.6, No 3, pp. 17-37, 2021.
  • [17] 5 RORATO, Eduardo Keller; SILVA, Pedro Paulo do Nascimento; KUNKEL, Maria
  • [18] Elizete. Kwawu passiva estético-funcional: Remix de uma prótese open-source de
  • [19] membro superior transradial manufaturada por impressão 3D. Human Factors in
  • [20] Design, Florianópolis, v. 12, n. 24, p. 149–155, 2023.
  • [21] 6 RODRIGUES, Ricardo; CINELLI, Milton; FERREIRA, Marcelo; DOMENECH,
  • [22] Susana. O design de próteses open source para membros superiores por meio da
  • [23] análise documental de projetos. e-Revista LOGO, v. 5, p. 93-119, 2016. DOI:
  • [24] 10.26771/e-Revista.LOGO/2016.2.06."
Como citar:

Oliveira, Herbert Fernandes de; Dias, Josualdo; Saba, Hugo; "DISCUSSING THE DIGITAL MANUFACTURE PROCESS OF PROSTHESES FOR UPPER LIMBS", p. 1137-1144 . In: . São Paulo: Blucher, 2024.
ISSN 2357-7592, DOI 10.5151/siintec2024-390598

últimos 30 dias | último ano | desde a publicação


downloads


visualizações


indexações