Agosto 2014 vol. 1 num. 2 - XXII Simpósio Internacional de Engenharia Automotiva
Artigo Completo - Open Access.
MEASURING AND COMPARING THE IGNITION DELAY TIMES OF DIESEL, ETHANOL ADDITIVE AND BIODIESEL USING A SHOCK TUBE
Santana, Claudio Marcio ; Barros, Jose Eduardo Mautone ;
Artigo Completo:
A burning process in a combustion chamber of an internal combustion engine is very important to know the maximum temperature of the gases, the speed of combustion, the ignition delay time of fuel and air mixture exact moment at which ignition will occur. The automobilist industry has invested considerable amounts of resources in numerical modeling and simulations in order to obtain relevant information about the processes in the combustion chamber and then extract the maximum engine performance control the emission of pollutants and formulate new fuels. This study aimed to general construction and instrumentation of a shock tube for measuring shock wave. As specific objective was determined reaction rate and ignition delay time of diesel and ethanol doped with different levels of additive enhancer cetane number. The results are compared with the delays measured for the ignition diesel and biodiesel.
Artigo Completo:
Palavras-chave: ,
Palavras-chave: ,
DOI: 10.5151/engpro-simea2014-27
Referências bibliográficas
Como citar:
Santana, Claudio Marcio; Barros, Jose Eduardo Mautone; "MEASURING AND COMPARING THE IGNITION DELAY TIMES OF DIESEL, ETHANOL ADDITIVE AND BIODIESEL USING A SHOCK TUBE", p. 114-141 . In: In Anais do XXII Simpósio Internacional de Engenharia Automotica - SIMEA 2014 [=Blucher Engineering Proceedings].
São Paulo: Blucher,
2014.
ISSN 2357-7592,
DOI 10.5151/engpro-simea2014-27
últimos 30 dias | último ano | desde a publicação
downloads
visualizações
indexações