Novembro 2018 vol. 5 num. 1 - XXII CONGRESSO INTERNACIONAL DA SOCIEDADE IBEROAMERICANA DE GRÁFICA DIGITAL

Artigo - Open Access.

Idioma principal | Segundo idioma

Parametric design of shells in reinforced concrete: a case study of the Los Manantiales

-

Ribeiro do Rozário, Camilla ; da Silva Tavares, Felipe ;

Artigo:

In this article it is proposed a study of reinforced concrete shells modeling, taking as case study the shell roof building designed by Candela in Xochimilco, Los Manantiales. The approach for this study is related to the comprehension of both project methodologies: the one before the use of the new emerging technologies and the one after. The objective of this study is to measure the structural efficiency of shells designed by both approaches and, simultaneously, how the emergence of new computational technologies and software’s could influence in the design process in the civil engineering and architecture’s design.

Artigo:

-

Download (PDF)

Palavras-chave: Parametric design; Form finding; Shells; Reinforced concrete,

Palavras-chave: -,

DOI: 10.5151/sigradi2018-1529

Referências bibliográficas
  • [1] ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS (ABNT). 2014. NBR 6118: Projetos de Estruturas de Concreto – procedimento. Rio de Janeiro. Faber, C. (1963). Candela: The Shell Builder. Princeton University. Reinhold Publishing Corp. Candela, F. (1962). Hacia una nueva filosofía de las estructuras (3 ed.). Buenos Aires: Artes Gráficas Bodoni. Dimcic, M. S. (2011). Structural Optimization of Grid Shells based on Genetic Algorithms. Dr.-Ing Thesis on ITKE, Stuttgartt Uniersity. 8 22th CONFERENCE OF THE IBEROAMERICAN SOCIETY OF DIGITAL GRAPHICS Garlock, M.; Billington, D.; and Allen, S. (2008). Building for the Future: Evaluating the Current Viability of Thin Shell Concrete Structures. Princeton University. Pugnale, A. (2009). (Digital) Form-finding. In Tedeschi, A. (Eds.), Algorithms Aided Design: parametric strategies using grasshopper, (pp. 353-359). Brienza, Potenza: Le Penseur Publisher. Rippmann, M. (2016). Funicular Shell Design: Geometric approaches to form-finding and fabrication of discrete funicular structures. Dr. Thesis on ETH Zurich. Tomas, A.; Martí-Montrull, P. (2010). Optimality of Candela's concrete shells: A study of his posthumous design. Journal of the International Association for Shell and Spatial Structures, 51, 67-77.
Como citar:

Ribeiro do Rozário, Camilla; da Silva Tavares, Felipe; "Parametric design of shells in reinforced concrete: a case study of the Los Manantiales", p. 183-190 . In: . São Paulo: Blucher, 2018.
ISSN 2318-6968, DOI 10.5151/sigradi2018-1529

últimos 30 dias | último ano | desde a publicação


downloads


visualizações


indexações