Dezembro 2016 vol. 4 num. 1 - 2nd International Seminar on Industrial Innovation in Electrochemistry

Full Article - Open Access.

Idioma principal

Synthesis of spherical microscale and nanoscale modified silica particles using spray-drying and spray-pyrolysis process

Gonin, C. F. N. ; Goes, M. A. de ; Berton, M. A. C. ; Conceição, L. da ;

Full Article:

In the present work, we prepared modified and unmodified microscale and nanoscale silica particles using spray-drying and the spray-pyrolysis process, respectively, which could be an alternative for the production of this kind of product in industrial scale. For it, modified Stöber method was used to synthetize the precursor solution including tetraethyl orthosilicate (TEOS) and triethoxy(octyl)silane (ETOS) as precursors and 3-(Trimethoxysilyl)propyl methacrylate (γ-MPS) as template for the functionalization. The silica sol passed into both equipment to obtain the final powder. The surface morphology was investigated with Scanning Electron Microscopy (SEM), and the Fourier Transform Infrared spectroscopy (FT-IR) was used to describe the functionalization of the final powder. SEM results show that we successfully synthetized spherical microscale and nanoscale particles with spray-drying and spray-pyrolysis process, respectively. The FT-IR analysis show the functionalization of the silica powder obtained with both technologies. It is possible to consider these technologies as a simple way to produce modified spherical silica particles in an industrial scale.

Full Article:

Download (PDF)

Palavras-chave: Spray-drying, Spray-pyrolysis, silica, powder,

Palavras-chave: ,

DOI: 10.5151/chempro-s3ie2016-13

Referências bibliográficas
  • [1] S. Zellmer, M. Lindenau, S. Michel, G. Garnweitner, C. Schilde, Influence of surface modification on structure formation and micromechanical properties of spray-dried silica aggregates, Journal of Colloid and Interface Science, 2016, vol. 464, 183-190.
  • [2] H. Gleiter, Nanocrystalline Materials, Progress in Materials Science, 1989, vol. 33, 223-315.
  • [3] Progress in developing spray-drying methods for the production of controlled morphology particles: From the nanometer to submicrometer size ranges, Journal Advanced Powder Technology, 2011, vol. 22, 1-19.
  • [4] K. Waldron, W. Duo Wu, Z. Wu, W. Liu, C. Selomulya, D. Zhao, X. Dong Chen, Formation of monodisperse silica microparticles via spray drying, Journal of Colloids and Interface Science, 2014, vol. 418.
  • [5] D. Sen, J. Bahadur, Avik Das, S. Mazumder, J.S. Melo, H. Frielinghaus, R. Loidl, E. Coli imprinted nano-stuctured silica micro-granules by spray-drying: Optimization and calcination temperature, Journal Colloids and Surfaces B: Biointerfaces, 2015, vol. 127, 164-171.
  • [6] H. Ran Jang, H-J. Oh, J-H. Kim, K. Youl Jung, Syntheis of mesoporous spherical sílica via spray pyrolysis: Pore size control ans evaluation of performance in paclitaxel pre-purification, Journal of Microporous and Mesoporous Mateirials, 2013, vol. 165, 219-227.
  • [7] D. Jong Seo, S. Bin Park, Y. Chan Kang, K. Leong Choy, Formation of ZnO, MgO and NiO nanoparticles from aqueous droplets in flame reactor, Journal of Nanoparticle Research, 2003, vol. 5, 199-210.
  • [8] W. Stöber, A. Fink, E. Bohn, Controlled growth of monodispersed silica spheres in the micron size range, Journal of Colloids and Interface Science, 1968, vol. 26, 62-69.
  • [9] H. Zou, S. Wu, J. Shen, Polymer/Silicate Nanocomposites: Preparation, Characterization, Properties and Applications, Chemical Reviews, 2008, vol. 108, 3893-3957.
  • [10] T. Ribeiro, C. Baleizão, J.P.S Farinha, Functional Films from Silica/Polymer Nanoparticles, Journal Materials, 2014, vol. 7, 3881-3900.
  • [11] T. Golhami, M. Salavati-Niasari, M. Bazarganipour, E. Noori, Synthesis and characterization of spherical silica nanoparticles by modified Stöber process assisted by organic ligand, Journal Superlattices and Microstructures, 2013, vol. 61, 33-41.
  • [12] K. Sreenivasa Rao, K. El-Hami, T. Kodaki, K. Matsushige, K. Makino, A novel methof for synthesis of silica nanoparticles, 2005, vol. 289, 125-131.
  • [13] Z. Luo, R.Y. Hong, H.D. Xie, W.G. Feng, One-step synthesis of functional silica nanoparticles for reinforcement of polyurethane coatings, Journal Powder Technology, 2012, vol. 218, 23-30.
  • [14] E. Effati, B. Pourabbas, One-pot synthesis of sub-50 nm vinyl- and acrylate- modified silica nanparticles, Journal Powder Technology, 2012, vol. 219, 276-283.
  • [15] O. Kaspar, V. Tokarova, G. S Nyanhongo, G. Gubitz, F. Stepanek, Effect of cross-linking method on the activity of spray-dried chitosan microparticles with immobilized laccase, Food and bioproducts processing, 2013, vol. 91, p 525-533.
  • [16] D. Sen, J. Bahadur, A. Das, S. Mazumder, J. S. Melo, H. Frielinghaus, R. Loidl, E. coli imprinted nano-structured silica micro-granules by spray drying: Optimization of calcination temperature, Colloids and Surfaces B: Biointerfaces, 2015, vol. 127, p 164-171.
  • [17] S. Boulfrad, Influence de la nanostructure sur les propriétés électriques et la stabilité de zircones à l’état massif, PhD thesis defended the november, 15th2007 at the Institut National Polytechnique de Grenoble, France.
  • [18] V. Venkatathri, preparation of silica nanoparticles trough coating with octyldecyltrimethoxy silane, Indian Journal of chemistry, 2007, vol. 46A, 1955-1958.
  • [19] X. Gao, Y. Zhu, X. Zhao, Z. Wang, D. An, Y. Ma, S. Guan, Y. Du, B. Zhou, Synthesis and characterization of polyurethane/SiO2 nanocomposites, Journal of Applied Surface Science, 2011, vol. 257, 4719-4724.
Como citar:

Gonin, C. F. N.; Goes, M. A. de; Berton, M. A. C.; Conceição, L. da; "Synthesis of spherical microscale and nanoscale modified silica particles using spray-drying and spray-pyrolysis process", p. 149-160 . In: Proceedings of 2nd International Seminar on Industrial Innovation in Electrochemistry . São Paulo: Blucher, 2016. São Paulo: Blucher, 2016.
ISSN 2318-4043, DOI 10.5151/chempro-s3ie2016-13

últimos 30 dias | último ano | desde a publicação


downloads


visualizações


indexações